Taps

Choosing sanitaryware and fittings for hospital use can literally be a life or death decision. The need to deliver water and remove waste efficiently, reduce cross infection and cater for the physical limitations of patients demands a lot from every sanitary installation.

Demountable pillar mixer tap with removable spout and fitted with Armitage Shanks Bioguard outlet.

Integral thermostat, single sequential lever operation and single flow horizontal nozzle. Includes thermal disinfection features, spout is removable for autoclave sterilisation.

Demountable panel mixer tap, removable spout fitted with Armitage Shanks Bioguard outlet.

Integral thermostat, time flow sensor operation and single flow horizontal nozzle particularly suited for use with Scrub up troughs.

Markwik 1/2in pillar, deck mounted (S8200AA) and wall mounted (S8210AA) mixer taps with 15cm levers and swivel nozzle.

When taps are closed the levers are parallel to the wall. Suitable for low or high pressure systems. Single flow mixers require balanced supplies. Suitable for closed fist operation. For washbasins and sinks. Flow rate 9 Litres per minute @ 0.1 bar. Consideration should be given to safe hot water delivery.

Fittings for sinks and sluices. High neck (S8265AA) pillar taps. with 15cm levers.

When taps are closed levers are parallel to wall. Suitable for low or high pressure systems. Suitable for closed fist operation. Chrome plated. Inlets screwed 1/2in BSP male. For use in connection with domestic services procedures.

Stainless steel, with its impervious and non-toxic surface, has the characteristic of being quick and easy to clean. This attribute makes it the ideal choice for fixtures and fittings for hospital and healthcare projects.

Available as a high neck pillar tap, deck mounted (TP1062) or wall mounted (TP1118)

Eden is a cranked bridge mixer tap, with 150mm levers and a swan neck spout. This tap can be adujusted to suit both 180mm and 200mm tapholes centres.

Available as deck mounted (TP1147) or wall mounted (TP1146).

The HTM64 Thermostatic Safe Touch Sequential mixer tap is designed specifically for use in hospitals, healthcare and commercial applications. The long sequential lever rotates through 180° and can be operated by the hand, wrist or elbow. Featuring ‘SafeTouch’ technology, the surface temperature is maintained below 42°C even around the hot inlet. Compliance with NHS model engineering specification D08 is assured with TMV3 approval. WRAS / TMV3 approved.